# Restart Network Interface

1. **Open the Main Menu** \
   Press the \* button on the terminal keypad or tap the Verifone banner.
2. **Go to Supervisor Menu** \
   Select Supervisor and enter the password (default is 12345, unless changed). If you have amended this please refer to <mark style="color:purple;">page 43</mark> on the [Webcom Manual](/webcom-manual/webcom-manual.md).
3. **Open Communication** \
   Settings Select Communication.
4. **Access More Options** \
   Tap More.
5. **Open Configuration** \
   Select Configuration.
6. **Restart Network Interface** \
   Tap Start/Restart Network Interface.
7. **Choose Connection Method** \
   Select the connection type you are currently using (e.g., Wi-Fi or Lan).
   * **Config Started:** \
     The terminal will state Interface started if it has established a connection.&#x20;
   * **Config Failed:** \
     The terminal will state an error message with a Red X. This will either be related to a network issue or the terminal not having the network setup.&#x20;

#### [<mark style="color:$success;">Back to V240M - How To Guides</mark>](/v240m-how-tos/v240m-how-to-guides.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://helpcenter.verifone.com/v240m-how-tos/restart-network-interface.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.