Amending a Wi-Fi Network

1. Open the Main Menu Press the * button.

2. Go to Supervisor Menu Select Supervisor and enter the password (default is 12345, unless changed). If you have amended this please refer to page 43 on the Webcom Manual.

3. Open Communication Settings Choose Communication, then select the Wi-Fi tile.

4. Open Configuration Select Configuration to access Wi-Fi settings.

5. Select the Network to Edit In the Wi-Fi menu, choose the network you want to amend.

6. View/Edit Network Select View / Edit.

7. Open Authentication Settings Select Authentication.

8. Update Password Choose Pre-Shared Key (PSK). Clear the old password or enter a new one if it was missed during setup.

9. Confirm Changes Press OK.

10. Return to View/Edit Screen Press the red X once or select the arrow on the blue bar.

11. Save Changes Select Save.

12. Confirm Save Press OK.

13. Apply Network Settings Select Yes when prompted to apply changes.

14. Complete Update Press OK when the interface restarts, then select the top bar or press the red X to exit menus and log in.